招標項目名稱：渤中29-4油田29-1區塊I期開發項目臍帶纜集中采購
Project Name: Centralized procurement for Umbilical of Bo Zhong 29-4 OILFIELD 29-1 BLOCK Phase I Development Project
招標編號：0704-2540JDCP1007/01
Bid No.：0704-2540JDCP1007/01
日期：2026年1月5日
Date : January 5, 2026
中化建國際招標有限責任公司（以下稱為“招標代理機構”），中國海洋石油集團有限公司的全資子公司，受中海石油（中國）有限公司（以下稱為“招標人”）委托，就渤中29-4油田29-1區塊I期開發項目所需部分貨物及相關服務進行國際公開招標。現邀請投標人對下列貨物和服務提交電子密封投標：
CNCCC International Tendering Co., Ltd., a wholly-owned subsidiary of China National Offshore Oil Corporation (CNOOC), (hereinafter referred to as “the Procurement Agency”), entrusted by CNOOC China Limited (hereinafter referred to as “Procuring Entity(Company/Purchaser)”), intends to organize an International Competitive Bidding for the purchase of the Goods and the relevant services required under the project of Bo Zhong 29-4 OILFIELD 29-1 BLOCK Phase I Development. Bidders are kindly requested to submit their electronically sealed bids for the following Goods and Services.
1. 招標條件 Preconditions for Solicitation
項目概況：渤中29-4油田東南距山東省龍口市約81km，西距渤中28-2南油田約15km，油田平均水深約24.0m。渤中29-4油田位于渤南低凸起中段，富烴凹陷黃河口凹陷東洼北緣，研究區位于渤中29-4油田北部。
項目設計開發井 12口（采油井8口、注水井4口），采用自升式鉆井平臺進行鉆完井作業。項目在航路內新建1套泥面以下生產系統BZ29-4 SPS，包括BZ29-4 SPSD（采油井4口、注水井2口）和BZ29-4 SPSE（采油井4口、注水井2口），2套海床下鋼圓筒防護系統，1條0.97千米 BZ29-4SPSE至 BZ29-4 SPSD 混輸海管，1條6.85千米BZ29-4 SPSD 至 BZ29-6 WHPA 混輸海管，1條6.85千米BZ29-6 WHPA至BZ29-4 SPSD 注水海管，1條0.97千米 BZ29-4SPSD至 BZ29-4SPSE 注水海管，1條7.10千米BZ29-6 WHPA 至 BZ29-4SPSD復合臍帶纜，1條7.82千米 BZ29-6 WHPA至BZ29-4 SPSE 復合臍帶纜，并對相關在生產設施進行校核改造。
Project Summary：The BoZhong 29-4 oilfield is located approximately 81 km southeast of Longkou City, Shandong Province, and about 15 km west of the Bohai 28-2 South oilfield, with an average water depth of around 24.0 m. The BoZhong 29-4 oilfield is situated in the middle section of the BoZhong Southern Low Uplift, along the northern edge of the Dongwa depression in the Huanghekou depression, a hydrocarbon-rich area. The study area is located in the northern part of the BoZhong 29-4 oilfield.
The project involves the design and development of 12 wells (8 oil wells and 4 water injection wells), using a self elevating drilling platform for drilling and completion operations. The project will construct a new production system BZ29-4 SPS below the mud surface within the route, including BZ29-4 SPSD (4 oil wells and 2 water injection wells) and BZ29-4 SPSE (4 oil wells and 2 water injection wells), 2 sets of steel cylinder protection systems under the seabed, one 0.97-kilometer BZ29-4 SPSE to BZ29-4 SPSD mixed pipeline, one 6.85-kilometer BZ29-4 SPSD to BZ29-6 WHPA mixed pipeline, one 6.85-kilometer BZ29-6 WHPA to BZ29-4 SPSD water injection pipeline, one 0.97-kilometer BZ29-4 SPSD to BZ29-4 SPSE water injection pipeline, and one 7.10-kilometer BZ29-6 WHPA to BZ29-4SPSD composite umbilical, one 7.82-kilometer BZ29-6 WHPA to BZ29-4 SPSE composite umbilical, and relevant verification and renovation of production facilities.
資金到位或資金來源落實情況：已落實。
Fund availability or the status of fund source /confirm/iation: /confirm/ied.
項目已具備招標條件的說明：已具備。
Statement on whether the Project is ready for solicitation: Ready
2. 招標內容Subject Matter of Procurement
貨物名稱：臍帶纜
Name of Goods: Umbilical
數量：__2_
Quantity: __2__
主要技術規格：
(1) 1條7.10千米BZ29-6 WHPA 至 BZ29-4SPSD復合臍帶纜及其附件；
(2) 1條7.82千米 BZ29-6 WHPA至BZ29-4 SPSE 復合臍帶纜及其附件；
Main Specifications:
(1) one 7.10-kilometer BZ29-6 WHPA to BZ29-4SPSD composite umbilical；
(2) one 7.82-kilometer BZ29-6 WHPA to BZ29-4 SPSE composite umbilical；
交貨期：
Delivery Schedule:
1、從中華人民共和國關境內提供的貨物：
For goods offered from within the PRC customs territory:
(1) SPSD：臍帶纜、全部附件；SPSE：臍帶纜、備用臍帶纜、UTA和全部附件；
交貨地點：DAP天津指定地點；交貨期：合同簽訂后12個月。
1st batch：SPSD： umbilical,and all ancillaries；SPSE：umbilical, Spare umbilical, UTA, and all ancillaries；
DAP Designated location in Tianjin. Delivery Date：Within 12 months after signing the contract .
(2) J-TUBE 拖拉頭假體；頂部懸掛假體；
交貨地點：DAP建造場地指定地點；交貨期：合同簽訂后12個月內。
2nd batch：Dummy Pull In Head；Dummy hang-off assembly for fit up test：
DAP Delivery to construction site Designated location；Delivery Date：Within 12 months after signing the contract.
(3) 低壓電纜樣纜（用于SPSD&SPSE UTA FACT端接測試）；
交貨地點：DAP中國（天津港或指定的其他城市），交貨期：合同簽訂后10個月內送至SPSD&SPSE 水下生產系統供應商指定地點。
3rd batch：LV cables sample for SPSD&SPSE UTA FACT Termination Test；
DAP company designated location in Tianjin or other city of PRC. Delivery Date：DDP SPSD&SPSE SPS manufacturer Designated location within 10 months after signing the contract.
(4) UTA基礎結構物、張緊器測試樣纜：
交貨地點：DAP天津指定地點。交貨期：合同簽訂后10個月內；
4th batch： UTA foundation sample control umbilical for tensioner test。
DAP Delivery to Designated location in Tianjin. Delivery Date: Within 10months after signing the contract.
2、從中華人民共和國關境外提供的貨物:
For goods offered from outside PRC customs territory:
(1) SPSD：臍帶纜和全部附件；SPSE：臍帶纜、備用臍帶纜、UTA和全部附件；
交貨地點：天津指定地點；交貨期：合同簽訂后12個月。
1st batch：SPSD：umbilical and all ancillaries；SPSE：umbilical, Spare umbilical, UTA, and all ancillaries；
DAP Designated location in Tianjin。Delivery Date：Within 12 months after signing the contract.
(2) J-TUBE 拖拉頭假體；頂部懸掛假體；
交貨地點：建造場地指定地點；交貨期：合同簽訂后12個月內。
2nd batch：Dummy Pull In Head；Dummy hang-off assembly for fit up test：
DAP Delivery to construction site Designated location；Delivery Date：Within 12 months after signing the contract.
(3) 低壓電纜樣纜（用于SPSD&SPSE UTA FACT端接測試）；
交貨地點：DAP中國（天津港或指定的其他城市），交貨期：合同簽訂后10個月內送至SPSD&SPSE水下生產系統供應商指導地點。
3rd batch：LV cables sample for SPSD&SPSE UTA FACT Termination Test；
DAP company designated location in Tianjin or other city of PRC. Delivery Date：DDP SPSD&SPSE SPS manufacturer Designated location within 10 months after signing the contract.
(4) UTA基礎結構物 張緊器測試樣纜：
交貨地點：DAP 天津指定地點。交貨期：合同簽訂后10個月內；
4th batch：UTA foundation sample control umbilical for tensioner test：
DAP Delivery to Designated location in Tianjin. Delivery Date: Within 10 months after signing the contract.
3. 對投標人的資格和業績要求
Requirements for Qualifications and the Past Performance of the Bidder:
（1）資格要求Requirements for Qualifications of the Bidder
A.★如果投標人為中國境內注冊公司，投標人需具有合法有效的企業法人營業執照、稅務登記證及組織機構代碼證或證照合一的營業執照，投標時需提供原件掃描件（原件備查）；
If the Bidder is a company registered within the territory of China, it shall possess a legally valid Business License of an enterprise legal person, Tax Registration Certificate, and Organizational Code Certificate, or a unified business license combining these certificates. When submitting the bid, the Bidder shall provide a scanned copy of the original document (with the originals kept available for verification).
★如果投標人為中國境外注冊公司，需提供有效的公司登記注冊證明；
If the Bidder is a company registered outside the territory of China, it shall provide a valid certificate of company registration.
★投標人為分公司的，需具有合法有效的營業執照（境內注冊）/公司登記注冊證明（境外注冊）和上級法人單位授權書（授權該分公司投標和簽訂合同），投標時需提供原件掃描件（原件備查）。
If the Bidder is a branch company, it shall possess a legally valid business license (for those registered within China) / certificate of company registration (for those registered outside China) and an authorization letter from the superior legal entity (authorizing the branch to bid and sign contracts). When submitting the bid, the branch shall provide scanned copies of the original documents (with the originals kept available for verification).
★招標人認可該分公司和上級法人單位的資質、資格和業績，不認可同一上級法人單位的其它分公司的資質、資格和業績。分公司與上級法人單位只可一家參與投標，同時參與投標的，投標均無效。
窗體頂端
窗體底端
The qualifications, eligibility and performance of the branch and its superior legal entity shall be recognized by the Procuring Entity(Company/Purchaser), while the qualifications, eligibility and performance of other branches under the same superior legal entity shall not be recognized. only one of the branch and its superior legal entity may participate in the bid; if both participate in the bid, all their bids shall be regarded as invalid bids.
B. ★投標人所投產品的制造商須具備有效的GB/T19001(ISO9001)質量體系認證證書，中國國內認證機構簽發的證書應可在中國國家認證認可監督管理委員會網站核實(http://www.cnca.gov.cn/)。如果有中國國家相關部門發布的最新體系標準，以最新體系標準為準。投標時需提供原件掃描件（原件備查）。
The manufacturer of the product bid by the bidder must simultaneously hold valid certificates for GB/T19001 (ISO9001) quality management system certification. Certificates issued by the Chinese domestic certification bodies shall be verifiable on the website of the Certification and Accreditation Administration of the People's Republic of China (http://www.cnca.gov.cn/). If there are updated system standards issued by the Chinese relevant national authorities, the latest system standards shall prevail. When submitting the bid, the bidder shall provide scanned copies of the original certificates (with the originals kept available for verification).
C. ★不接受代理Bid by an agent is not acceptable
投標人應為所投貨物的制造商。不接受代理商投標。
The Bidder shall be the manufacturer of the Goods being offered. Any bid by an agent is not accepted.
投標人以自己制造的貨物參與投標的，不能再將此貨物同時授權給其他投標人參與投標，否則相關的所有投標將被拒絕。投標人將被授權的貨物再授權給其他投標人同時參與投標的，相關的所有投標將被拒絕。
If a bidder participates in the bidding with goods manufactured by itself, the bidder shall not authorize other bidders to offer the same goods in the bidding at the same time; otherwise, all related bids will be rejected. If a bidder re-authorizes other bidders the authorized goods to participate in the bidding at the same time, all related bids will be rejected.
D.★是否接受聯合體投標：否
Is any bid by a consortium or a joint venture accepted? No.
E.★未領購招標文件是否可以參加投標:不可以
Can a bidder participate in the bidding without purchasing the Solicitation document? No.
F.★證書:承諾交貨時提供ABS或DNV或BV或CCS之一出具的臍帶纜及UTA產品COC證書，和隨產品證書的質量控制相關記錄文件等。
Certification:It is committed that the umbilical and UTA, with applicable certifications from ABS or DNV or BV or CCS, will be delivered along with the Product Certificate of Conformity (COC) and relevant quality control records.
（2）★業績要求Requirement for Bidder's Past Performance:
2015年1月1日至投標截止日（以合同簽署時間為準），投標人應具有至少1個合同的臍帶纜產品的供貨業績（供貨業績的制造商必須是投標人），且均滿足臍帶纜液壓鋼管內徑≥1"和電力電纜電壓等級≥6kV的技術要求。
投標人須按規定格式提交業績表，并提交相關業績證明文件。業績證明文件包括：1）銷售合同和2）用戶簽字或蓋章的到貨驗收材料（到貨驗收單或調試驗收?qǐng)?bào)告或其他可以證明合同項下貨物已經到貨驗收的有效證明材料）。投標人所提交的業績證明文件必須至少體現以下內容：合同簽署時間、合同簽署頁（國內貿易合同應有雙方蓋章，國際貿易合同應有雙方簽字或蓋章）、貨物名稱、滿足臍帶纜液壓鋼管內徑≥1"和電力電纜電壓等級≥6kV的技術要求、用戶簽字或蓋章的到貨驗收材料（買方接收證明或調試驗收證明或到貨驗收單或其他可以證明合同項下貨物已經到貨驗收的有效證明材料）/與合同或訂單金額一致的所有增值稅發票掃描件（如有清單須提供，須體現發票號；發票需包含合同號或貨物名稱，且與合同或單個訂單一致）。
針對本項目提供的業績，投標人投標時提供ABS或CCS或BV或DNV等出具的臍帶纜的COC證書，證書中應明確取證單位為投標單位。
未提交業績證明文件，或通過所提供的業績證明文件無法認定滿足上述業績要求的，均視為無效業績。
From January 1, 2015, until the bid submission deadline (with the contract execution date serving as the basis), the Bidder must have a supply record of umbilical cable products for at least one (1) contract. The manufacturer for the supplied performance must be the Bidder itself. All such supplied products must meet the following technical requirements: the inner diameter of the hydraulic steel tube within the umbilical cable must be ≥ 1 inch, and the voltage rating of the power cables must be ≥ 6 kV.
The Bidder is required to submit a completed Performance Record Form in the specified format, along with supporting documentary evidence for the claimed performance. The supporting documents must include:
The sales contract; and Delivery acceptance documents signed or stamped by the end-user (e.g., delivery acceptance report, commissioning acceptance report, or other valid proof confirming the receipt and acceptance of the goods under the contract).
The submitted performance documentation must clearly demonstrate at least the following elements:
Contract execution date.
Contract signature pages (For domestic contracts: stamps from both parties; For international contracts: signatures or stamps from both parties).
Description/name of the goods.
Confirmation that the supplied umbilical cables meet the technical requirements of hydraulic steel tube inner diameter ≥ 1 inch and power cable voltage rating ≥ 6 kV.
Delivery acceptance documents signed or stamped by the end-user (Buyer's receipt /confirm/iation, commissioning acceptance certificate, delivery acceptance report, or other valid proof of goods receipt/acceptance) / Scanned copies of all Value-Added Tax invoices corresponding to the full contract or individual order value (if an invoice list exists, it must be provided and show the invoice numbers; invoices must include the contract number or goods description, matching the contract or specific order).
For the performance cited for this project, the Bidder must provide a Certificate of Conformity (COC) for the umbilical cable, issued by a recognized certification body such as ABS, CCS, BV, DNV. The certificate must clearly identify the certified entity as the Bidder.
Any claimed performance for which supporting documents are not submitted, or where the submitted documents cannot verify compliance with the above requirements, shall be deemed invalid.
4. 有興趣的投標人可通過以下方式獲取招標文件
Interested bidders may obtain the solicitation documents through the following method:
從2026年1月5日開始至2025年1月12日止，請登錄“中國供應鏈數字化平臺”(https://bid.cnooc.com.cn/）的“招標公告”頁面進行購買。
Bidders are requested to log in to the "招標公告" (Notice of Procurement ) page of the CNOOC Supply Chain Digital Platform (https://bid.cnooc.com.cn/) to purchase the Solicitation documents from January 5, 2026 to January 12, 2026.
首次登錄必須先進行注冊（免費），注冊方式選擇“自主注冊公開招標”。選擇其他注冊方式將導致注冊失敗。注冊成功后，方可購買招標文件。
For the first-time login to the platform, registration is mandatory (free of charge). The registration method must be "自主注冊公開招標" (Self-Registration for Public Bidding). Choosing other registration methods will result in a registration failure. only after successful registration can a bidder purchase the Solicitation documents.
投標人須在線填寫“購買招標文件登記表”，并在線支付標書款。支付成功后，投標人可自行下載招標文件。招標文件每套售價為人民幣200元或25美元，售后不退。文件發售費用用于印刷和郵寄招標文件/資格預審文件。有郵寄需求的請?jiān)谥Ц稌r(shí)備注收件人相關信息。
The bidder is requested to fill in the "購買招標文件登記表" (Registration Form for Purchasing Solicitation documents) online and pay the document fee online. After successful payment, the bidder can download the Solicitation documents by themselves. Each set of the Solicitation documents is priced at 200 Renminbi yuan or 25 US dollars, and the fee is non-refundable after purchase. This fee is used for printing and mailing the solicitation documents/ pre-qualification documents. For those requiring mailing, please fill in the recipient's relevant information when making the payment.
對于使用美元購買招標文件的投標人，需電匯至以下賬號：
For the bidder who purchases the Solicitation documents in US dollars, it is required to wire transfer to the following account number:
PAYEE： CNCCC INTERNATIonAL TENDERING CO., LTD.，
BANK： INDUSTRIAL AND COMMERCIAL BANK OF CHINA, Beijing National Cultural and Financial Cooperation Demonstration Zone Jinjie Sub-branch，
ACCOUNT： 0200000709117000351，
SWIFT CODE: ICBKCNBJBJM，
BANK ADDRESS： No. 237 Wangfujing Street, Dongcheng District, Beijing, P.R. China 100006
5. 投標文件的遞交 Submission of Bid
投標文件遞交截止時間和方式：
所有投標文件都應附上按規定提交的投標保證金，并于2026年1月27日上午9:00（北京時間）前線上提交至“中國國際招標網”（http://www.chinabidding.com)。在此時間后收到的投標文件恕不接受。
Deadline and Method for Submission of Bid documents:
All bid documents shall be accompanied by the Bid Security submitted in accordance with the specified requirements, and shall be submitted online to the China International Bidding Website (http://www.chinabidding.com) before 9:00 a.m. (Beijing Time) on January 27, 2026. Bid documents received after this time will not be accepted.
6. 開標時間Bid Opening Time
定于2026年1月27日9:00時（北京時間）開標。
Bids？will？be？opened at？9:00 a.m (Beijing time) on January 27, 2026.
7. 開標地點Venue for Bid Opening
“必聯網”(http://www.ebnew.com) 或 “機電產品招標投標電子交易平臺”（http://www.chinabidding.com）
Bid？opening？at: http://www.ebnew.com？or？http://www.chinabidding.com
8. 本次招標公告同時在“中國招標投標公共服務平臺”、“機電產品招標投標電子交易平臺”和“中國供應鏈數字化平臺”上發布。
The Notice of Procurement will be published on the website of the China Tendering & Bidding Public Service Platform, Electronic Trading Platform for Mechanical and Electrical Products Bidding and CNOOC Supply Chain Digital Platform at the same time.
9. 投標人在投標前應在“必聯網”或“機電產品招標投標電子交易平臺”完成注冊及信息核驗。評標結果將在“機電產品招標投標電子交易平臺”和“中國供應鏈數字化平臺”上發布。
Before submitting a bid, bidders shall complete registration and information verification on either EBNew or the Electronic Trading Platform for Mechanical and Electrical Products Bidding. The bid evaluation results will be published on the Electronic Trading Platform for Mechanical and Electrical Products Bidding and CNOOC Supply Chain Digital Platform.
10.
未曾在中國電力招標采購網（www.dlztb.com）上注冊會員的單位應先注冊。登錄成功后根據招標公告的相說明下載招標文件！項目 聯系人：李楊
咨詢電話：010-51957458
傳真：010-51957412
手機：13683233285
QQ:1211306049
微信：Li13683233285 郵箱：1211306049@qq.com
備注：欲購買招標文件的潛在投標人,注冊網站并繳納因特網技術服務費后，查看項目業主，招標公告，中標公示等，并下載資格預審范圍，資質要求，招標清單，報名申請表等。為保證您能夠順利投標，具體要求及購買標書操作流程按公告詳細內容為準，以招標業主的解答為準本。
來源：中國電力招標采購網?編輯：cnooc